On my W201 190D the door weatherstripping fabric has come loose and hanging off on one side. Its very thin fabric. I tried a hot melt glue gun but it did not last long. Any other ways to correctly repair this? Fabric glue perhaps?

Attached Thumbnails

 

__________________
---------------------------------
87 300SDL
87 190D 2.5NA 5sp
90 300GD with 606 turbo!
08 GL320 CDI
12 ML350 Bluetec
---------------------------------
Past rides:
82 300SD - the one that started it all!
81 240D
87 300SDL - the first one.
92 300D 2.5 Turbo
99 E300 Turbodiesel
07 E320 Bluetec
12 S350 Bluetec

I had the same issue on the driver's door of my W124. I didn't have any adhesives on hand (and didn't feel like masking off the area for a spray adhesive)... so I had a fairly new tube of black, hi-temp silicone sealant on hand. I smeared a thin layer on the rubber seal, then pulled the fabric over it. I used some painter's tape to hold the cloth down, then shut the door. 5 hours later, I opened the door, removed the tape and it held. That was six weeks ago and we've had some blistering hot days here in the South East. Hasn't come undone yet. YMMV

__________________
1991 300D 2.5 "Rocinante"
2002 Golf TDI "Teen Spirit"
--------------------
1984 300D
1966 Mustang I6 3sp
1985 Mazda RX-7 GSLSE
1982 Toyota Supra
1977 Datsun 280z
1971 Datsun 240z