|
|
|
#1
|
|||
|
|||
jack point plugs
Saw some rubber plugs on Ebay that fit into the jack point holes on a 123. Left what I felt was a hefty bid but this morning found I was outbid.
Does anyone know where I can get these plugs online? Checked fastlane and several other sources and no luck. Looked it up under the "body mechanical and trim" heading, thinking they would be there but no luck. Are they worthwhile or do they trap moisture in causing faster rust? Thanks... Cheers, Bill |
#2
|
||||
|
||||
Call Phil he can probably get them, Fastlane has a large selection but Phil can get you anything!
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#3
|
|||
|
|||
Quote:
-- eskimo |
#4
|
||||
|
||||
Great question
The answer is yes and no.
Is that clear as mud? If you have rust already, it must be repaired first. If there is no rust even in the jack hole, apply a light coating of grease to the jack hole and install your new plugs. One of my friends fills his jack holes with axle grease every year and plugs them, it leaks out during the summer and makes a mess. Have a nice day.
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ |
#5
|
|||
|
|||
Somebody here suggested to me to go to the dealer for plugs!
|
#6
|
|||
|
|||
Grease sounds so logical...No, I have no rust, not even in the holes so a light coat a couple times a year ought to keep it.
Going to the dealer?? I don't like going to the dealer for anything but I guess sometimes we must. I'll call Phil first. I bid $22.50 for a set of four on ebay. They brought the next bid. It'll be interesting to see what the dealer charges. Thanks.... Cheers, Bill |
#7
|
||||
|
||||
Whats wrong with going to the dealer? I get a lot of little parts from the local dealer. I just replaced the little broken plastic glove box screws that adjust the glove box lid. I could have hunted for a parts car but they were $3.12 from the dealer with the rubber covers on the heads. Why bother?
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#8
|
|||
|
|||
The plugs are available at the dealer. If they can't find them it's because they weren't originally installed on the 123. They were original to the 124 and fit the 123 exactly the same. I bought four from the dealer at $1.60 each, part # 201-899-00-08. It always pays to check out if the Ebay "deal" is really a deal. I second whunter in that you want to start with a clean, dry jack hole and then smear a bit of grease on the plug before inserting it. Also, be sure the pliers are still in your tool kit because it may be tough to get them out with your hands.
__________________
LRG 1987 300D Turbo 175K 2006 Toyota Prius, efficent but no soul 1985 300 TDT(130K miles of trouble free motoring)now sold |
#9
|
||||
|
||||
Lol
Quote:
We got to the new years party and told the story, everyone wanted to use my cork screw that night. LOL Perhaps I should buy a Mercedes Benz cork screw. LOL ROFL Last edited by whunter; 02-02-2008 at 06:10 PM. |
#10
|
||||
|
||||
Quote:
__________________
Proud owner of .... 1971 280SE W108 1979 300SD W116 1983 300D W123 1975 Ironhead Sportster chopper 1987 GMC 3/4 ton 4X4 Diesel 1989 Honda Civic (Heavily modified) --------------------- Section 609 MVAC Certified --------------------- "He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche |
#11
|
|||
|
|||
Have you guys noticed that the ebay bidding has slowed down on these since they first appeared? They used to bring in excess of $20 and now they're hovering around $12.
I have yet to get any but will do so and get them from the dealer as they're cheaper than Ebay! Cheers, Bill |
#12
|
|||
|
|||
Plugs and part numbers
Take note of the part number for those plugs. It starts with 201. That means they are the same plugs used for the 201 chassis (190 series cars). My 190D has these plugs, and every other 190E and D that I've seen also has them. You might be able to find them in a junkyard pretty easily, as there are plenty of 201 chassis (190E's and 190D's) in the 'yards.
SteveM.
__________________
'93 190E/D 2.5 Turbodiesel 5-speed (daily driver) '87 190D 2.5 Turbo rustbucket - parts car '84 Dodge Rampage diesel - Land Speed Record Holder '13 Ram 2500 Diesel '05 Toyota 4Runner |
#13
|
|||
|
|||
Quote:
Cheers, Bill |
#14
|
||||
|
||||
Quote:
__________________
Proud owner of .... 1971 280SE W108 1979 300SD W116 1983 300D W123 1975 Ironhead Sportster chopper 1987 GMC 3/4 ton 4X4 Diesel 1989 Honda Civic (Heavily modified) --------------------- Section 609 MVAC Certified --------------------- "He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche |
#15
|
|||
|
|||
Get them here
I may be the last person to have figured this out but those plugs are available here at mercedesshop.
Item Number: 2018990008 Main Category: MERCEDES BENZ Sub Category: Body Mechanical & Trim Description: Rubber plug for jack point holes W123, W124, W201 Weight: 0.200 Fastlane: http://catalog.peachparts.com/item.wws?sku=2018990008 Last edited by whunter; 03-14-2010 at 03:11 AM. Reason: REPAIRED PART LINK |
Bookmarks |
|
|