PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   Cylinder Head Cracking OM602 (http://www.peachparts.com/shopforum/diesel-discussion/103576-cylinder-head-cracking-om602.html)

AusMBtech 09-13-2004 11:17 AM

Cylinder Head Cracking OM602
 
G'day All!

I've heard heaps about the 603 cyl head cracking but does the 601, 602 othe the later 604, 605, 606 engines ever experience unprevoked cyl head cracking (without overheating) :confused: ?

We don't get many of the older diesels in Australia so I haven't seen enough to get an idea on reliability.

I've got a W201 with OM602 manual, I pull a large boat alot but I never sit on full throttle up any long hill, always just a bit back from it (prob 90%) to try and keep the temp down although it never passes 92DegC :eek: even with AC in the middle of summer.

I'll never hold full throttle on a hill even if the cyl heads aren't known for cracking............just wonderin........... :p

gsxr 09-13-2004 02:37 PM

All the other heads (601, 602, etc) have NO problems with cracking unless they are severely abused (driven in the red zone). The early 603 heads (#14, maybe #15) are the fragile ones. The late 603 heads (#17, #20, #22) are all pretty bulletproof.

:cool:

AusMBtech 09-16-2004 06:29 AM

That's what I wanted to hear :D

Thanks

sixto 09-16-2004 01:08 PM

But watch the chain. Some specific 602s had iffy timing chains. Dave probably knows what years and models. There might have been a recall in the US.

Sixto
95 S420
87 300SDL

gsxr 09-16-2004 01:14 PM

Good point. It was a certain range of engine numbers. Full details in this PDF:

http://www.meimann.com/docs/mercedes/OM60x_Timing_Chain_TSB.pdf

:cool:

AusMBtech 09-17-2004 04:37 AM

Yeah, I went through ALL of the old bullitens at work (none of which were sorted) before I bought this car. My engine doesn't apply for the timing chain but I did need the hydraulic lifters (which i got for a good price ;) ) reverse light switch in one day. Apart from that nothing else applied to it. :D

P.E.Haiges 09-17-2004 11:05 AM

I noticed in the PDF, the MB instructions on checking the cam timing said to use the V timing mark on the camshaft, not an indicator on a valve.

It also said to turn the engine by the crankshaft bolt.

So both of the above must be the correct methods.

P E H


All times are GMT -4. The time now is 06:48 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website