|
|
|
#1
|
|||
|
|||
allen head or socket
need to replace fan clutch on 86 300sdl. did a search and still unclear as to the type of fastener holding clutch assembly to pulley. is it an allen head? or do i use a socket? anyone remember the size? thank you.
|
#2
|
|||
|
|||
i continued the search
" I've not had any problem removing the 8mm allen head bolt securing the clutch to pulley using just a plain 'ol allen key. Some folks have reported using a cheater pipe on an allen key to generate enough force to break the bolt free." this sound correct?
|
#3
|
|||
|
|||
allen head
I shortened the Allen about 1/2" to allow easier access to the fastener and used a 8mm. socket on the end of a couple of 1/4" extension pieces to engage the allen wrench and provide access and leverage.
|
#4
|
|||
|
|||
Take a look at Baum Tools they show all sorts of tools relating to this area, perhaps one of them will give you your answer?
Kevin
__________________
'85 300SD |
Bookmarks |
|
|