|
|
|
|
|
#1
10-23-2004, 03:28 PM
|
|||
|
|||
|
Block Heater Cord... ?
Is the block heater cord connection a standard adapter socket or is it a proprietary mercedes special made adapter... If it is a standard type of electrical socket, I could buy the socket and make my own since I have tons of 3 prong power cords... Thanks!... Indy
|
|
#2
10-23-2004, 04:59 PM
|
|||
|
|||
|
The block heater has two pins that stick out and engage two sockets in the cord. I don't believe that this configuration is a standard where you could just go out and buy the plug with the sockets in it.
|
|
#3
10-23-2004, 10:19 PM
|
||||
|
||||
|
The one on my 240D looks like this.
__________________
79 240D (no name yet) 203K Miles Maple Yellow 98 2500 4x4 HD Dodge 24 Valve Cummins TD 83 Chevy Van (Dead-Trans. shot)
|
|
#4
10-24-2004, 01:55 PM
|
||||
|
||||
|
Mine has no metal ring at the heater end like the other photo, proof certain that there are different styles of block heaters out there.
Smitty's sells one for $9.83 that fits several of the stock heaters I have. see: http://www.sasponline.com photo attached.
__________________
'95 E320 Wagon my favorite road car. '99 E300D wolf in sheeps body, '87 300D Sportline suspension, '79 300TD w/ 617.952 engine at 367,750 and counting!
|
 |
| Bookmarks |
|
|
Linear Mode
