|
|
|
|
|
#2
11-10-2004, 08:56 AM
|
|||
|
|||
|
A vacuum leak which is preventing the vacuum shutoff from quickly doing its job. Check for old, cracked, oily leaky rubber vacuum hoses and replace.
__________________
'82 300SD - 361K mi - "Blue" "Good judgement comes from experience. Experience comes from bad judgement." listen, look, .........and duck. 
|
|
#4
11-10-2004, 09:06 AM
|
|||
|
|||
|
Door lock actuators and climate control elements are frequent causes of vacuum leaks. To help isolate the problem, see if there is a difference in shut down with the doors locked versus unlocked, heater on versus a/c, etc. Until I replaced a door lock actuator, my car would only shut down with the doors locked.
|
|
#5
11-10-2004, 09:15 AM
|
||||
|
||||
|
check all your "Y" and "X" and inline rubber couplings on the vacume hardlines. They should all fit real tight, if any are loose you found your problem.
__________________
Proud owner of .... 1971 280SE W108 1979 300SD W116 1983 300D W123 1975 Ironhead Sportster chopper 1987 GMC 3/4 ton 4X4 Diesel 1989 Honda Civic (Heavily modified) --------------------- Section 609 MVAC Certified --------------------- "He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
|
 |
| Bookmarks |
|
|
Linear Mode
