|
|
|
#1
|
|||
|
|||
Front OIl Seal Leak
Has anyone done a re & re on the front oil seal and have any tips to pass along. The manual talks about all kinds of special jigs for seating the new seal and I wonder if that is really required. It looks like an easy job once the rad is removed. Is the dampner hard to get off. The car is a 1984 300D turbo.
John |
#2
|
||||
|
||||
I need to do the same project on my 79 240D. I could use the same tips.
Thanks in advance.
__________________
79 240D (no name yet) 203K Miles Maple Yellow 98 2500 4x4 HD Dodge 24 Valve Cummins TD 83 Chevy Van (Dead-Trans. shot) |
#3
|
||||
|
||||
Pretty straight forward and no you do not need the special tools if you take your time with it. The hardest part will be removing/torqueing the crank pully bolt. You should be able to do this job with just the radiator removed.
__________________
Jim |
Bookmarks |
|
|