|
|
|
#1
|
|||
|
|||
1985 injection pump
hi,
i have a 1985 300td turbo, the injection pump has some wires leading to it, can somebody shed me some light what these electrical connections are for....i traced the wires it leads to a black box on the passenger kick panel.....thanx for your help....john |
#2
|
||||
|
||||
The black box you are referring to is the EGR control module. It uses a rack position sensor in the pump (the wires in question) to determine when to open the valve via the vacuum controls.
|
#3
|
|||
|
|||
injection pump
thanx forthe info.....i bought the 1985 turbo wagon not running. i replaced the glow plug except #3(broken from the inside) and also the glow plug relay. i loosened the injector plug connection and fuel comes out. i also replaced the glow plugs, still no luck, we couldn't make it too start. a little bit of white smoke comes out of the exhaust pipe. we even adjusted the valves, plus we installed a large new battery that we keep fully charged all the time. according to the previous owner, one morning it just wouldn;t start, we did find the air filter totally plugged up- it was very black(light barely goew thru it). any ideas guys?? greatly appreciate any help.. thinking of removing the head, i don't know.....thanx .....john
|
#4
|
|||
|
|||
From the comments you made about the air filter, it sounds like no maintenance has been done in quite a while. The nice thing about diesel is it is fuel or air. Since it is cranking good, I would suspect fuel. Changed fuel filters? Checked filter screen? Are you using fresh fuel?
__________________
Sam 84 300SD 350K+ miles ( Blue Belle ) |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
injection pump swap | yago | Diesel Discussion | 2 | 12-12-2004 05:23 PM |
Failed emissions: no Air Injection Pump? | pistolpete5113 | Tech Help | 10 | 11-11-2004 05:07 PM |
'87 903.960 Injection Pump, not pumping | jhh322 | Tech Help | 4 | 08-06-2003 10:44 AM |
Timing the injection Pump on a 1986 190D 2.5 | MCLARENF1 | Tech Help | 6 | 08-02-2002 04:20 PM |
300D injection pump interchangeability | Marty Newman | Tech Help | 0 | 02-28-2002 09:54 AM |