|
|
|
#1
|
||||
|
||||
Valve Adjustment Cost
Howdy,
My car is already in the shop and I am considering having the valves adjusted while it is in there. I will eventually do this myself, but want to do some more routine stuff first. I have searched and searched the archives, couldn't find the answer to this question: What is a reasonable amount to pay a mechanic for a valve job? What should I expect to be charged?
__________________
1983 300SD (got it for five bills!) Austin, TX |
#2
|
||||
|
||||
Should be under an hours worth of labor. What's his hourly labor charge?
__________________
Bill Reimels Now down to one: 1972 300SE 3.5 W109 (Euro delivery) |
#3
|
|||
|
|||
right, a lot of times a job is 1 hour even if it takes less, or so i generally hear. This job should take anyone who knows what they are doing no more than 1 hour.
__________________
'82 300SD - 361K mi - "Blue" "Good judgement comes from experience. Experience comes from bad judgement." listen, look, .........and duck. |
#4
|
||||
|
||||
I had recently looked this one up. Book says its 1.7 hours.
__________________
1980 500SE/AMG Euro 1981 500SEL Euro 1982 380SEL 1983 300TD 1983 500SEC/AMG Euro 1984 500SEC 1984 300TD Euro 1986 190E 2.3-16 1986 190E 2.3 1987 300D 1997 C36 AMG 2003 C320T 4matic past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350 |
#5
|
||||
|
||||
My valve adjustment example done on 3/11/05 in Naples FL (used him for many years) check original timing chain (still 0 degrees).
1.5 hrs @ $69.00 per hr = $103.50 1 valve cover gasket = 10.00 Total $113.50 I found getting it done about every 24,000 mile works well for me and the mileage is still 27 mpg to 30 mpg mixed driving. I do all small things like hot overnight draining oil changes every 3,000 miles with Mobil 1 5-40. I would do this myself if I did not trust this guy to do a better job then I could.
__________________
_____________________________ In scuba diving and skydiving as in life, if it isn't fun, your doing it wrong. Original owner & daily driver, 1983 300SD 298,000 miles. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Valve adjustment OM615, 616, 617 FYI. | whunter | Diesel Discussion | 189 | 03-22-2024 08:52 PM |
What tools needed for 2.3-16 valve adjustment? | Dan Rotigel | Tech Help | 12 | 01-23-2005 09:43 PM |
Less Power After Valve Adjustment? | coldwar | Diesel Discussion | 3 | 12-22-2004 10:22 AM |
Valve Adjustment - Should I do it by the book? | 84W123DT | Diesel Discussion | 5 | 09-13-2004 11:22 AM |
Modulator valve adjustment 85 300dt | shear2001 | Diesel Discussion | 3 | 02-04-2003 06:14 AM |