Originally Posted by yshahar

Hi There,

I have the manual CD's and the book. I couldn't find the relevant information how to remove the hub. I understand what I need to do and I'll go at it once the bearing kit will show up. I decided to replace them, even without visual inspection, since spinning the rotoer without the wheel makes all sorts of noises.
I followed the link that was provided in the link and couldn't find the relevant information how to remove the hub. If you have the job number I'll appreciate it.
Wanted to thank the detailed description how to do the job + tip regarding re-mounting the hub to the wheel in order to release the allen screws. I prefer not to use power tools if I can help it(I do have a 5HP air compressor). I hope to post pictures once it is all done.
Thanks,
Yossi
PS. I guess that they used the blue NOT the red locktight?

Originally Posted by Larry Delor

Please be sure and torque the allen bolts to the proper torque. If memory serves correct, it should be 100ft/lbs. (yeah, you'll have to put some "butt" into it).

Have fun!

Originally Posted by rg2098

Would not torquing them to 100 possibly cause a pulsation in new brakes that has been getting worse?