|
|
|
#1
|
|||
|
|||
Control Arm 1997 E300D
Im looking at replacing the control arms in the front end. I have a rattle on bumps and some shimmy at 55 mph. I cannot narrow down where the exact problem is. I have already replaced the ball joints which fixed some of the shimmy. The ride seems a little rough on bumps also so I am considering replacing the shocks too. I am confused at weather to replace the front upper or lower control arms?. There is a listing for both parts. Is there anyone that has done this work, and any suggestions to save me time and maybe some money? Thanks!.. Indy
|
#2
|
||||
|
||||
I have the same on mine. I wouldn't worry about it. Make sure you have no play in the actual wheel by moving it up and down with a crowbar and try to shake it side to side. If you feel no play then leave it be. I replaced my swaybar links thinking it was the problem. It went away breifly then came back. I also have the shimmy, steering wheel vibration at about 55mph.
__________________
#dieselFLEET --------------- '97 E300 '99 E300 |
#3
|
|||
|
|||
Do you also have the rough ride when you hit bumps etc? ..... For the Shimmy: I read a thread somewhere that a guy did practically everything then finally replaced the control arms and it fixed his shimmy problem. I was wondering if anyone has come across and repaired this problem. I don't think it is normal. Thanks!.. Indy
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Upper control arm replacement on '80 300D | neahrens | Diesel Discussion | 2 | 07-08-2005 08:41 PM |
Upper control arm replacement on '80 300D | neahrens | Diesel Discussion | 1 | 07-07-2005 07:44 PM |
83 240D How hard is it to replace an Upper Control Arm? | Carrameow | Tech Help | 3 | 09-15-2003 10:59 AM |
Lower control arm bushings on 107, any warnings? | Steve Gutman | Tech Help | 0 | 07-09-2003 08:46 AM |
Lower control arm bushings bad | 123 300D driver | Tech Help | 1 | 08-24-2000 09:26 PM |