|
|
|
|
|
#1
08-05-2005, 04:02 PM
|
|||
|
|||
|
Injectors - are the shims...
Are the shims the same size in a 617 injector and a 603 injector. I am thinking about building a pop tester and then rebuilding the injectors myself. I don't have extra shims around, but I have a set of injectors from a 78 300d. Can I use them to balance the pop pressure on my 603 injectors?
__________________
andy t '78 300d '95 volvo 850, wagon '86 300sdl - engine out, maybe I'll have it rolling by June whole bunch o' bicycles 
|
|
#2
08-06-2005, 12:35 AM
|
|||
|
|||
|
Yes the shims are the same size but most likely they have a very different thickness as the springs in the 603 injectors are longer so you'll have to do some grinding and/or stacking.
__________________
2004 VW Jetta TDI (manual) Past MB's: '96 E300D, '83 240D, '82 300D, '87 300D, '87 420SEL
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Genuine Bosch rebuilt injectors – Poor Quality? | RunningTooHot | Diesel Discussion | 28 | 05-13-2015 05:32 PM |
| Fuel injectors | hbofinger | Tech Help | 10 | 05-25-2005 10:00 PM |
| Brake pad shims | JHZR2 | Diesel Discussion | 2 | 11-06-2002 02:49 PM |
| Worn injectors symptoms ? | Denrac | Diesel Discussion | 29 | 12-17-2001 10:45 PM |
| Genuine Bosch rebuilt injectors (Diesel) – Poor Quality? | RunningTooHot | Tech Help | 8 | 11-16-2001 09:34 PM |
Linear Mode
