Mercedes 200D Timing Marks
 

Replacing head gasket and dont know where the timing marks are on fuel pump and cam shaft, mercedes 200D. Tried to keep the timing chain tight on the fuel pump and crank but fear that it has moved while removing the cylinder head.
Any help and advice appreciated.

What year 200D?

Sixto
87 300SDL

If you didn't remove the chain I doubt it could have moved enough for the chain to jump a tooth on either sprocket. I wouldn't worry about it. Just make sure you get the cam timed to the crank pulley and I'm pretty sure it will start.

Sixto
87 300SDL

If it's like my 220D, the mark for the camshaft is on the drivers side of the front cam bearing tower. It is just the tiniest of a bump, almost looks like casting flash! Supposed to line up with a notch in the cam gear washer.
Don't know about the IP...