PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   How do I remove the hazard switch? (http://www.peachparts.com/shopforum/diesel-discussion/141471-how-do-i-remove-hazard-switch.html)

bnaquin 01-02-2006 11:08 AM

How do I remove the hazard switch?
 
I want to replace the hazard switch on my í82 300SD but I canít find a way to remove the wood trim without damaging it. Iím afraid that if I apply too much force, the wood will crack Do I have to pull the wood panel to access the rear of the hazard switch for replacement? Is there some kind of trick to removing the wood trim piece?

Toblin 01-02-2006 12:17 PM

I changed mine in my '79 300D. I used an exacto knife to pry it out. The new one snaps right in. BTW, How much did you pay for a new one? Mine cost $79 :stunned:

SD Blue 01-02-2006 01:55 PM

Quote:

Originally Posted by bnaquin
..... Do I have to pull the wood panel to access the rear of the hazard switch for replacement? Is there some kind of trick to removing the wood trim piece?

I have found the most sure way is to remove the wood panel. Start at the ashtray and work up. There are two screws under the bottom edge, once the ashtray and radio are removed, it can be pulled down and back to access the back of the panel.


All times are GMT -4. The time now is 08:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website