|
|
|
#1
|
|||
|
|||
need a new engine
my recently purchased 300SDL is in need of a new engine. my mechanic said 3 cylinders have no compression due to something breaking loose and getting in there. anyone have any recommendations on where to get a new one?
|
#2
|
||||
|
||||
Quote:
Bernie - this sound like a start to a good thread - what is the rest of the story on this newly aquired 126>
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#3
|
|||
|
|||
the rest of the car is in great shape, i bought it knowing it had engine problems but i thought it was a cracked head. it only had 102k miles on it. my mechanic said he has a guy w a car there thats in bad shape but the engine runs good and has been serviced by him recently. he said the used one w about 200k miles on it would run me about $1,500...not bad.
|
#4
|
||||
|
||||
I may be in the same boat, removing the head off one now to see what the damage was from my wife running it hot. As stated in my thread, I had prices ranging from $1800 for used to $5000 and $6000 for rebuilt plus core of $1000 on rebuilds. This of course is if you do all labor. My local mechanic wanted $6000 for the engine plus labor. I paid $4000 for the car, but I am the second owner and it is (was) in fabulous shape! I just need to get it up and going again!
__________________
1987 300 SDL Working on the engine! It's up and running! |
#5
|
||||
|
||||
My SDL is in super shape and have often thought about this situation. In my current position I would buy a MB crate and stab it myself. The warranty situation is quite a bit stronger with MB. Sounds like you are on the right track if you found a good used one, these cars are awesome!
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#6
|
|||
|
|||
Quote:
|
#7
|
||||
|
||||
$1500 for a shortblock that's used? Wow, they're a lot more than I thought. Maybe I will hold onto one of them then after all.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#8
|
|||
|
|||
Quote:
http://www.mercedesengines.net/proddetail.asp?prod=300SDL%28603%2986%2D87LB |
#9
|
||||
|
||||
I had several quotes for used long blocks, ready to drop and roll so to speak. Those ranged from $1800 to $2600 with a guarantee of at least 6 months to a year.
__________________
1987 300 SDL Working on the engine! It's up and running! |
Bookmarks |
|
|