|
|
|
#1
|
|||
|
|||
Cruise control is stuck ... ACCELERATING !!!
-- '86 300SDL - THE CRUISE WAS REAL weird 4 a while - was working but took some encouragement - now i can be cruising along at a moderate speed and it will engage and start 2 accelerate - scarey - how can i just disable the cruise control - ??
|
#2
|
|||
|
|||
Simply unplug the connector on the cruise control amp (it is the aluminum box approx 1"x3"x5") located under the dash to the left of the steering column.
Good luck, Jim
__________________
2005 C240 4matic wagon (daily driver) 87 190D - 225K (on loan) 85 190D - 312K (on loan) 2011 Subaru Legacy AWD (Wife's) |
#3
|
|||
|
|||
Or you can disconnect the cruise actuator. It's a rectangular 8-pin connector on the inside of the driver's fender, somewhere in the vicinity of the blue "flying saucer".
|
Bookmarks |
|
|