|
|
|
#1
|
|||
|
|||
Gasket question
Is there a gasket between the exhast down pipe and the turbo outlet? I have to replace my downpipe and know there is a ring between the down pipe and exhasut pipe, but I don't see a part listed for the down pipe - turbo outlet.
Thanks |
#2
|
|||
|
|||
Exhaust Seal
1984 300d Turbo 137k
Go To *************** The Down Pipe Is 125 And Seal Is 4.48,and 11.32 Order New 2 Ea Copper Pipe Connector Nuts And New Hanger To Trans If Needed. 2 Hrs Diy Torque Is 5 Check 2 Ea Mufflers They Come With Connector Pipes Go To Auto Zone For Pipe Expander And Clamp And Weld Shop $10.00 Later Done, 4 New Rear Rubber Donuts , Use Two Shop Jacks To Remove 2 Ea Mufflers And Dry Fit To Install |
#3
|
|||
|
|||
There is no gasket between the downpipe and the turbo outlet. The top of the downpipe is expanded and fits over the beveled nose of the turbo outlet. The downpipe has a three bolt flange that is part of the downpipe and it secures the downpipe to the turbo outlet with three copper nuts and washers.
|
Bookmarks |
|
|