Tensioner Pulley/Belt Removal Question w/ Picture

[1badav]

After reading a number of threads on this process I am still a little unclear as to whether anything needs to be done as far as loosening the pictured bolt. It appears this bolt/bracket combination would prevent the plastic piece which is rotated counter clockwise (towards the passenger side of the engine compartment) from rotating.

Comments/Suggestions?

Thanks in advance.

[h2odiesel]

The bracket pivots on the pin you have circled. to to remove the belt, you must first remove the bolt in the upper right of your pic. then you insert a rod in the opening in the top of the bracket to lever against the spring. The stock lug wrench fits just right.