Comes Forward The Dummy
Sometimes I can be more stupid than I even thought I could be. I just did a major brake job on my 300D and realize I used the blue anti-squeal paste on the sides of the pads as well as the new pins that hold the pads. Brakes feel fine. Will I be OK like this for a week until I can get in there and clean them off and use grease on the sides like I should have? I was working on 4 cars at the same time, me who can't walk and chew gum without getting hurt.
|
Your supposed to put it on the sides and the pins.
As long it isn't on the side that presses on the rotor your OK. Danny |
1) You are supposed to paste the sides of the pads, per Phil. and the BACKS as well. Don't know why you pasted the pins? I guess they're OK as along as you have the cotter pins secure...
NOW What do you mean by re bleeding the fuel system???? |
So I didn't screw up! Great. The pins I was just hoping to keep them from rusting solid again. I glopped the back with some orange stuff I had for brake squeal, worked good in my other MB.
Re-Bleeding, pump the living s..t out of the hand bleeder. didn't know what else to call it (ok, re priming then, now it comes to me). Been bleeding to many brakes. |
All times are GMT -4. The time now is 02:53 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website