Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-15-2006, 03:30 PM
Registered User
 
Join Date: Dec 2002
Location: New Jersey
Posts: 218
1983 300SD Transmission Problem

Well I may have my first major problem. Car has 323,000 miles. Started the car up backed out of the driveway put it in drive and nothing. I had to bring the RPM's up to go forward at a crawl back up the driveway. Where do I start looking?
Reply With Quote
  #2  
Old 05-15-2006, 03:43 PM
Registered User
 
Join Date: Dec 2002
Location: RI shore
Posts: 2,937
B2 piston
__________________
'82 300SD - 361K mi - "Blue"

"Good judgement comes from experience. Experience comes from bad judgement."

listen, look, .........and duck.
Reply With Quote
  #3  
Old 05-15-2006, 08:37 PM
Registered User
 
Join Date: Dec 2002
Location: New Jersey
Posts: 218
How hard is it to change? What is the procedure?
Reply With Quote
  #4  
Old 05-15-2006, 08:49 PM
Registered Voter
 
Join Date: Apr 2006
Location: Birmingham, AL
Posts: 526
Quote:
Originally Posted by dpbrowne
Well I may have my first major problem. Car has 323,000 miles. Started the car up backed out of the driveway put it in drive and nothing. I had to bring the RPM's up to go forward at a crawl back up the driveway. Where do I start looking?

how's the fluid level?
__________________
'85 300D Turbo - CA Version
Reply With Quote
  #5  
Old 05-17-2006, 01:09 PM
Registered User
 
Join Date: Dec 2002
Location: New Jersey
Posts: 218
Fluid was a little low. I put in about 1/3 quart. It still hardly moves at high rpm's. Reverse is normal.
Reply With Quote
  #6  
Old 05-17-2006, 01:21 PM
Registered User
 
Join Date: Dec 2002
Location: RI shore
Posts: 2,937
Start here:

http://www.peachparts.com/shopforum/showthread.php?p=1048115#post1048115

722.118 transmission B2 servo/piston

http://www.peachparts.com/shopforum/tech-help/106400-c220-wont-go-forward-help.html#post732079

I Am Really Hurt Now
__________________
'82 300SD - 361K mi - "Blue"

"Good judgement comes from experience. Experience comes from bad judgement."

listen, look, .........and duck.
Reply With Quote
  #7  
Old 05-17-2006, 03:43 PM
Registered User
 
Join Date: Dec 2002
Location: New Jersey
Posts: 218
Thank you - I now have another project besides getting the tractor to run. Dennis
Reply With Quote
  #8  
Old 05-20-2006, 08:12 AM
Registered User
 
Join Date: Dec 2002
Location: New Jersey
Posts: 218
Thanks for all of your help. I removed the B2 (it was in two pieces) so I think I have the problem solved. I have a few questions:

thjere was a bar that came out (about 2 or 3 inches) Is that part of the B2 ?
How do i know if the sleeve is good and should be replaced?
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page