Well I may have my first major problem. Car has 323,000 miles. Started the car up backed out of the driveway put it in drive and nothing. I had to bring the RPM's up to go forward at a crawl back up the driveway. Where do I start looking?

B2 piston

__________________
'82 300SD - 361K mi - "Blue"

"Good judgement comes from experience. Experience comes from bad judgement."

listen, look, .........and duck.

How hard is it to change? What is the procedure?

how's the fluid level?

__________________
'85 300D Turbo - CA Version

Fluid was a little low. I put in about 1/3 quart. It still hardly moves at high rpm's. Reverse is normal.

Start here:

http://www.peachparts.com/shopforum/showthread.php?p=1048115#post1048115

722.118 transmission B2 servo/piston

http://www.peachparts.com/shopforum/tech-help/106400-c220-wont-go-forward-help.html#post732079

I Am Really Hurt Now

__________________
'82 300SD - 361K mi - "Blue"

"Good judgement comes from experience. Experience comes from bad judgement."

listen, look, .........and duck.

Thank you - I now have another project besides getting the tractor to run. Dennis

Thanks for all of your help. I removed the B2 (it was in two pieces) so I think I have the problem solved. I have a few questions:

thjere was a bar that came out (about 2 or 3 inches) Is that part of the B2 ?
How do i know if the sleeve is good and should be replaced?