|
|
|
#1
|
||||
|
||||
Cooling A/C problems
My car has been running hot and the a/c performance was lacking so here's what I did.
Removed radiator and cleaned the fins on the outside. They were dirty and really needed it. Sraightened fins on a/c condensor And did this Write-up on fan clutch repair see post #28 What a difference in cooling and a/c performance I recommend anyone with cooling complaints try these first before you spend lots of money. The 2 tubes of silicone only cost $22. |
#2
|
|||
|
|||
I cleaned the SD condensor and radiator fins last summer to help with a slight heat problem (approaching 100C). That does make a huge difference.
Did you see the post a few down from #28, about baking the clutch? I wonder if that might work as well as drilling a hole. And finally, you got the fluid from a Toyota dealer? |
#3
|
||||
|
||||
No need to bake the clutch when you drill a hole and put in a plug. The set screw was a 8-32 I got from home depot and bought a tap and drill combo too for just thst size so it was cheap!
|
Bookmarks |
|
|