![]() |
|
|
|
|
#1
|
|||
|
|||
Brake squeak while reversing only ???
123,126
Rear brakes squeaking while in revers , never in forward move. Took appart, completely cleaned, lubricate, that pads can move easily, makes the same noise again. Any experiences?? Thank you very much Petr |
#2
|
||||
|
||||
Quote:
Some brands of brake pads seem to do it worse than others... I've had better luck with PAGID, but your results may vary. Mike
__________________
_____ 1979 300 SD 350,000 miles _____ 1982 300D-gone---sold to a buddy _____ 1985 300TD 270,000 miles _____ 1994 E320 not my favorite, but the wife wanted it www.myspace.com/mikemover www.myspace.com/openskystudio www.myspace.com/speedxband www.myspace.com/openskyseparators www.myspace.com/doubledrivemusic |
#3
|
|||
|
|||
My 1980 240d has always done that.... for the 3 years I have had it....
|
#4
|
||||
|
||||
They just do that.
__________________
2016 Corvette Stingray 2LT 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#5
|
|||
|
|||
Mine does that, too. Makes a nice "back-up" warning.
|
#6
|
||||
|
||||
The Volvo did that. Turns out the rear pads were worn. I would check yours to be on the safe side, rear brakes get overlooked and could very well be due on or higher mileage vehicles.
__________________
Adam Lumsden (83) 300D Vice-President of the MBCA International Stars Section |
#7
|
||||
|
||||
I never had this problem, if anything I used Textar for the rear pads on my W123.
__________________
http://farm8.staticflickr.com/7271/7...144c3fc1dc.jpg |
#8
|
||||
|
||||
My SD does this if I am light on the brakes when reversing, or if its humid out or raining......always when in reverse though, they've never made a sound forwards....oh well....lets people know I'm coming.
![]()
__________________
-diesel is not just a fuel, its a way of life- ![]() '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#9
|
||||
|
||||
I recently installed new Textar pads in back, now I have that. I did not use shims, but did put some grease where the piston seats.
Annoying, nothing more.
__________________
83 SD 84 CD |
#10
|
||||
|
||||
I have textars (MB oem) on the rear and I also used the anti-squeal paste....didn't help.
![]()
__________________
-diesel is not just a fuel, its a way of life- ![]() '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#11
|
|||
|
|||
I had Wagner Thermo-Quiets front & rear. Nice bite and light dusting. I only used them because I was working at a parts store at the time. I took the rears apart twice trying to get rid of that back-up squeal. They had shims. I scuffed the rotor surfaces both times too. I finally replaced the rears with Monroe Dynamics. Not a peep since, they stop very well and the dusting is very light.
__________________
Sharing my partner's 2012 Forte 5dr SX til I find my next 123 or 126.. - Do I miss being a service advisor ??? ![]() |
![]() |
Bookmarks |
|
|