|
|
|
#1
|
|||
|
|||
Front Tranny seal 1983 123.
Hi
Front seal on transmission started leakeing pretty badly. ready to pull and change the 9.00 item i read in another post about also changing the front pump bushing does anyone know were this is located? is it the needle bearings behind the front seal? the exploded view i got of the pump doesnt show anything in it called a bushing. thanks charlie |
#2
|
|||
|
|||
If you have the later version with a needle bearing then you won't need to change it unless the bearing is munched (not too likely, I think)
__________________
'82 300SD - 361K mi - "Blue" "Good judgement comes from experience. Experience comes from bad judgement." listen, look, .........and duck. |
#3
|
|||
|
|||
bushing is bad
OK pulled the trans then when i slide the converter off the brass parts of the bushing were on it . The benz parts guy told me the bushing is almost impossible to get? the needle bearing type is available could i put the needle bearing bushning in place of the solid one?
Thanks |
#4
|
|||
|
|||
bump
Any ideas
Thanks |
#5
|
|||
|
|||
try http://www.bulkpart.com for parts. Can't imagine that not being available, that's just silly. BTW, they are extremely inexpensive, as you can see.
__________________
'82 300SD - 361K mi - "Blue" "Good judgement comes from experience. Experience comes from bad judgement." listen, look, .........and duck. |
Bookmarks |
|
|