PeachParts Mercedes-Benz Forum
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   Cherry bomb muffler( I'm going to get flack for this) (http://www.peachparts.com/shopforum/diesel-discussion/158942-cherry-bomb-muffler-im-going-get-flack.html)

resago 10-06-2006 11:33 AM
Kewl.

Rudolphrocks 10-06-2006 11:41 AM
Great deal exc. for the shipping @$20 :behead:

winmutt 10-06-2006 02:38 PM
Thats uh still $40 for a muffler?

Gil 09-19-2007 04:22 PM
So how hard was it to cut thru the straight pipe? Did you use a power saw or elbow grease? Were you able to use the original hangar in addition to your home made one in the rear?

bgkast 09-19-2007 10:34 PM
When I put a muffler on my straight pipe it took about 20 min of hacksawing.

Jim B. 09-19-2007 10:45 PM
Most incredible exhaust system you'll ever see on a Mercedes diesel.
 
Quote:
Originally Posted by SirNik84 (Post 1221451)
I had some Blue Streaks under my car for a while... i ended up having the vibration dampener section of the downpipe break off... i drove for like 3 months thinking it was the blue streaks that made my car so loud... but nope my exhaust was dumping into the engine compartment. so i said... screw that. and installed straight pipe. i like it. and it wasn't expencive because i did al the work myself... it is very ugly... but its under the car.. and i put chrom tips on it.. so it looks nice.
It is the most ingenious system I have ever seen.

those "straight" pipes on his 300SD.............are CYCLONE FENCE POSTS!!!

SirNik has a VERY promising future for sure.....:) IMO Incredible. You have to see it. It works good and will last forever!!!

ConnClark 09-20-2007 12:22 PM
Quote:
Originally Posted by Gil (Post 1624000)
So how hard was it to cut thru the straight pipe? Did you use a power saw or elbow grease? Were you able to use the original hangar in addition to your home made one in the rear?
We used elbow grease. It took a little while to cut it but not that much time. I have had much more "minor" repairs take longer. On my car the only hanger for the muffler was the ones on the rear. The next hanger was on the resonator If I remember correctly. I'll double check at lunch.


All times are GMT -4. The time now is 04:44 PM.
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website