|
|
|
#1
|
|||
|
|||
good used ac compressor, sat up for 2 yrs
I have a ac rotary compressor that was in excellent working order when i removed it about 2 yrs ago. It was on a 1980 mercedes 300sd. It turns well but the oils that were in it have thickened some. How would i soften and flush out the old thickened oil so i can install it in my 1980 300D. thanks for any assistance. RAY
|
#2
|
|||
|
|||
Flush it with the type of oil that you intend to use. Don't use any type of solvent.
|
#3
|
|||
|
|||
right. You'll get better flushing action if you heat it up. (not with a torch, though )
__________________
'82 300SD - 361K mi - "Blue" "Good judgement comes from experience. Experience comes from bad judgement." listen, look, .........and duck. |
#4
|
|||
|
|||
Compressor
Thanks I Was About To Do Something Stupid Like Rinse It With Alcohol And It Just Didn't Seem Like A Good Thing To Do. When I Replace It Am I Going To Need Any O-rings Or Washers. Thanks For Your Help Ray M
|
Bookmarks |
|
|