Searched this forum, but had no luck. I am trying to find out if anyone knows the sizes of all the fuel lines for an 87 300 sdl so I can replace them all.

thanks.

That's because most folks go with OE or dealer fuel lines. Click the Fastlane link at the top of the page and talk to Phil about what you need.

Sixto
... stay tuned

Which lines?

__________________
I'm not a doctor, but I'll have a look.

'85 300SD 245k
'87 300SDL 251k
'90 300SEL 326k

Six others from BMW, GM, and Ford.

Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]

All of them

Sixto
... stay tuned

I only need to replace the feed/return on the tank and the few on the IP.

__________________
I'm not a doctor, but I'll have a look.

'85 300SD 245k
'87 300SDL 251k
'90 300SEL 326k

Six others from BMW, GM, and Ford.

Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]

Some have had luck replacing the clear line but I think from the dealer they come with the banjo fittings.

I kinda like the way they take a set over time so it's easy to figure out which goes where

Sixto
... stay tuned

I plan to replace those when I yank my IP to reseal.

Just rebuild that 603 PS pump, it's a JOKE compared to the 617s. I think I spent 20min replacing the three seals.

__________________
I'm not a doctor, but I'll have a look.

'85 300SD 245k
'87 300SDL 251k
'90 300SEL 326k

Six others from BMW, GM, and Ford.

Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]

I think 5/16 works for the rubber ones that run to the clear pre filter. Plus the fuel heater, and the return.

My Goodyear Autozone hose seems to be doing well, when it isn't I'll just get a couple yards from the dealer and change it out.

__________________
1999 SL500
1969 280SE
2023 Ram 1500
2007 Tiara 3200