|
|
|
|
|
#1
09-23-2006, 07:05 PM
|
|||
|
|||
Flex plate bolts
Bought a new flex plate and 12 bolts. Question is how many bolts are used to bolt the plate to the rear crank shaft flange. I know six bolts is attached to the outer perimeter to the torque converter. Is the bolts used at the rear of the crank shaft the same used for the torque converter. When I ordered the flex plate, it showed 12 bolts, will 12 bolts complete the flex plate installation, including attaching it to the crank shaft and torque converter.
|
|
#2
09-23-2006, 07:09 PM
|
|||
|
|||
|
12 bolts from the flywheel to the crank and 6 from flexplate to torque converter.
|
|
#3
09-23-2006, 08:25 PM
|
|||
|
|||
|
What type of bolts are used to bolt it to the torque converter? The car call for 12 flywheel bolts, I assumed that all 12 will be used for the crank shaft and 6 different one are used to bolt it to the torque converter. What i'm trying to find out, will 12 flywheel bolt be enough to complete this job or will i need to order 6 more bolts to bolt it to the t/c. I don't see any where it call for any bolt for the t/c to flex plate. Thanks
|
|
#4
09-23-2006, 08:27 PM
|
|||
|
|||
|
The flexplate bolts to the flywheel with the 12 bolts that bolt the flywheel to the crank.
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
