|
|
|
#1
|
||||
|
||||
Need suggestions on straightening a euro bumper.
So I took my bumper to get straightened this afternoon at lunch. They quoted me around $600. . So. Any thoughts on 2x4' and C clamps? The damage is fairly minor on the bumper just twisted a few degrees.
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
#2
|
||||
|
||||
i doubt that the above described method will work very well on a benz bumper. the benz bumper is double curved and i would think would be very tricky to straighten. i think you will be better off to find a good used one.
tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#3
|
||||
|
||||
This is a euro! Its thin sheet metal! Replacement is not far from $400.
So for $20 bucks I got a 2x4 and some clamps. I have it sitting outside all clamped up good as new. I will let it sit for a few days and see what happens. I've read that in order to straighten metal it has to be bent to the exact opposite direction of the bend, we'll see though. I have faith in my redneck heritage.
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
#4
|
||||
|
||||
it cant hurt to try!
good luck tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#5
|
||||
|
||||
Well I figure if this doesnt work out I can use the wood supported by bricks clamped around the bumper to bend it a bit in the other direction. I weigh about and I'm sure I can find a stout friends to help.
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
Bookmarks |
|
|