|
|
|
#1
|
|||
|
|||
How important are clips for fuel line?
I replaced GPs on my 3.5 sdl by removing the intake manifold (they were clean!!!!)but broke the plastic clips that hold the hard injector lines.
__________________
82 300D....went to MB heaven 90 350 SDL....excercising con rods |
#2
|
||||
|
||||
i would order some new ones and replace them. they will keep your lines in good condition for a longer time since they prevent unneccessary vibration. like many things it is a system that is designed to work together.
tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#3
|
||||
|
||||
I have a pic on here somewhere where two injectors lines had touched from clip failure causing one to leak. It's a must fix item unless you carry spare hard lines in your trunk.
I cannot attach (size) the diagram and part# for the SDL, but if you want them PM me.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#4
|
|||
|
|||
And they are pretty cheap. Order some extra's so you'll have them he next time you want to do service that requires you to remove the lines.
Sholin
__________________
What else, '73 MB 280 SEL (Lt Blue) Daily driver: '84 190D 2.2 5 spd. |
#5
|
||||
|
||||
When I ordered Sunday I got one of each of the two kinds I need. That is all that was in stock. I wanted all 6. (4 of one, 2 of the other.)
-Jim
__________________
1995 S350D, Green with black leather interior. Bought January 2008 w/ 233,xxx miles. I did 22,000 miles during the first year of ownership. |
#6
|
||||
|
||||
My SDL (sold) injector lines touched even with new clips all around. The wear was minor since it was side-to-side contact with an adjacent line but it sounded like nailing at times. The lines must have been manhandled by a previous owner. I ran a slit down rubber vacuum hose and slipped it over the lines where they contacted.
Sixto 93 300SD |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|