|
|
|
#1
|
||||
|
||||
Steering Gearbox for 1987 300D Turbo
Hi,
I'm going to replace the Steering gearbox on my 1987 300D turbo (200K). I have a huge play (about 30mm) on the steering wheel and it drives me nuts. I replaced the drag link with the dumper already. I also tried to adjust the gearbox itself but I did not get any reduction of the play. I have used gearbox that was pulled from another 124 Mercedes with 100K miles on. I don't have any info about the model or year. I'm attaching pictures of it. Can you help me out here? Is this going to fit my car? If yes, any tips or procedure? What type of fluid should I use? Thanks
__________________
1987 300D Turbo, 190K miles Renovation in progress... |
#2
|
|||
|
|||
Be sure that your gearbox is really worn and that you've turned the adjustment screw the correct direction. It is counter intuitive, if I remember, you have to back the screw out to tighten the gears. A gearbox with 200k miles on it should still have some adjustment. Mine is well beyond that in miles and is really nice and tight after being adjusted.
__________________
DS 2010 CL550 - Heaven help me but it's beautiful 87 300D a labor of love 11 GLK 350 So far, so good 08 E350 4matic, Love it. 99 E320 too rusted, sold 87 260E Donated to Newgate School www.Newgateschool.org - check it out. 12 Ford Escape, sold, forgotten 87 300D, sold, what a mistake 06 Passat 2.0T, PITA, sold Las Vegas NV |
#3
|
||||
|
||||
Did you rebuild the idler arm? Took a large amount of play out of my steering.
__________________
1989 300E 144K |
#4
|
||||
|
||||
Quote:
Is the one on the picture going to fit my car? Are there any tricky steps involving the replacement? What kind of steering fluid should I use? Quote:
__________________
1987 300D Turbo, 190K miles Renovation in progress... |
Bookmarks |
|
|