|
|
|
#1
|
|||
|
|||
Upper Control Arms
Hi I have an 1985 300D Tubo. When the upper front control arms are replaced. Do you need to have an alignment done.
Thanks in advance.
__________________
Mike |
#2
|
||||
|
||||
Mike, I can't imagine why it would be necessary as its not associated with the steering system. Now if you were messing with tie rod ends, an alignment would be needed for sure.
__________________
the sooner you start... the sooner you'll get done If it ain't broke, don't fix it.. Its always simpler to tell the truth... 2007 Honda Accord EX 2007 Honda Accord SE V6 96 C220 97 Explorer - Found Another Home 2000 Honda Accord V6 - Found Another Home 85 300D - Found Another Home 84 300D - Found Another Home 80 300TD - Found Another Home Previous cars: 96 Caravan 87 Camry 84 Cressida 82 Vanagon 80 Fiesta 78 Nova Ford Cortina Opel Kadet 68 Kombi Contessa |
#3
|
||||
|
||||
Not with the upper control arms.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#4
|
|||
|
|||
Thanks Guys.
__________________
Mike |
#5
|
|||
|
|||
Absolutely. The bushings in the UCA's sag with age and cause the camber go become increasingly negative. If the alignment was within reason before replacings the control arms, the camber is most likely to be excessively positive with the new arms installed.
|
Bookmarks |
|
|