|
primer pump on 240D
I have a question on the pump. I tried to turn it by hand left and couldn't budge it. I then tried to turn it right no luck either. Any suggestions on how to get it so it will lift up to pump the line? Why is it so tight?
|
If it is black it is probably the new style and does not need to be rotated, just press.
|
It is a clear colored nylon round top. Not for sure how it comes up, didn't want to break it.
|
It unscrews counter-clockwise from top, then pumps. don't know why it's stuck, but that is how it works
Good thread: http://www.peachparts.com/shopforum/diesel-discussion/109076-heres-my-payback-diesel-primer-pump-replacement.html |
I got it loose it was just super tight. I used a screwdriver on one of the bosses & another to kind of tap with and it started moving. Thanks for the help...just didn't figure it would be that much of a case to deal with.
|
| All times are GMT -4. The time now is 09:14 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website