|
|
|
#1
|
||||
|
||||
Water Pump REmoval
Hey guys!
I had a question...How do you remove the four fan bolts, connected to the fan, water pump and pulley assembly? On a 1984 300sd Seems like you need a vice grip and special tool. Wrench keeps slipping off. Thanks. Tony |
#2
|
||||
|
||||
You basically have to make a special tool. I took a 10 mm box-open end wrench and ground down the outer box side to where the circumference is thin enough to fit in that tight area.
Hope this helps.
__________________
1983 123.133 California - GreaseCar Veg System Last edited by DeliveryValve; 01-08-2007 at 06:21 PM. |
#3
|
|||
|
|||
Exactly.
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
Bookmarks |
|
|