|
|
|
#1
|
||||
|
||||
Enabling City Lights
Is there any recommendation as to the type of wiring to be used when jumping a wire from the parking light pin to the city light pin?
Thanks, -Joe
__________________
'81 MB 300SD, '82 MB 300D Turbo (sold/RIP), '04 Lincoln Town Car Ultimate Sooner or later every car falls apart, ours does it later! -German Narrator in a MB Promotion Film about the then brand new W123. |
#2
|
||||
|
||||
dieseldiehard helped me out on my W124, he soldered a teflon wire on a pin from the power source of the brake lights coming from the connector that plugs into the turn signal assembly. And the other end of the wire was soldered to a pin that would go in the 6port euro connector to the corresponding connection of the city light on the headlight.
I hope that made sense, im a little sleepy
__________________
Current: 05 E320 CDI 07 GL320 CDI 08 Sprinter 05 Dodge Cummins 01 Dodge Cummins Previous 2004 E55 AMG 2002 C32 AMG (#2) 1995 E300 1978 300D 1987 300D 2002 C32 AMG(blown motor :[ 1981 300SD 1983 300SD 1987 300SDL 2002 Jetta TDI 1996 S420 1995 S500 1993 190E 2.6 1992 190E 2.3 1985 190E 2.3 5-Speed |
#3
|
||||
|
||||
For a 5 watt bulb? Use the wire inside a phone cord
Sixto 93 300SD 3.0 |
Bookmarks |
|
|