|
|
|
#1
|
||||
|
||||
Is this the right part on fastlane? (rack damper pin)
I was searching under diesel injection on fastlane and I found a "Governor Idler Adj. Pin" Part # D2030-17407 This is probably the rack damper right?
A link: :EDIT: removed bad link. It seems like that would be it, as its quite expensive I really need a new one, is this the right one or should I just call Phil? I'm going to order it tomorrow, either way...
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) Last edited by whunter; 09-29-2010 at 03:32 PM. Reason: removed bad link |
#2
|
|||
|
|||
That's it.
|
#3
|
||||
|
||||
Call Phil, Please...
I called Phil to get the following part number and directions of how to search it on FastLane.
Part# rack dampener pin for 1985 300SD http://www.peachparts.com/shopforum/diesel-discussion/120005-part-rack-damper-pin-1985-300sd.html#post858324 Item Number: 0000742674 Description: ADJUSTMENT BOLT, INJECTION PUMP The part number is the same for any OM617 turbo. The part you found is higher price, and different part number. Vehicle 1982 Mercedes Benz 300SD Part: Governor Idler Adj. Pin D2030-17407 Governor Idler Adj. Pin Bosch IN STOCK Call us if there is any doubt about part numbers. .
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ Last edited by whunter; 02-14-2011 at 03:18 AM. |
#4
|
||||
|
||||
I just ordered one, along with a different style block heater setup, and a new breather tube to replace the hack job the dealer put on it, goodbye oil mess! I got the rack damper bolt for $52, excellent price.
Oh, I now have a normal block heater kit for sale, the standard one that goes in the freeze plug, I think I paid around $62 or so for it off fastlane a few months ago. (I'll sell it for $50 shipping included) I decided I don't want to attempt removing the freezeplug. Last edited by whunter; 09-29-2010 at 03:35 PM. Reason: removed bad links |
#5
|
||||
|
||||
That looks like a great breather hose...How much was that????
Austin I need one too....
__________________
'87 924S '81 280SEL Sold -> 81 300SD - 93 300E w/ 3.2 85 300D- 79 300SD 82 300CD 83 300CD - CA 87 190E 5 spd 87 Porsche 924S "..I'll take a simple "C" to "G" and feel brand new about it..." |
#6
|
||||
|
||||
The breather hose was only $22! I was amazed!
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#7
|
||||
|
||||
Hey since you're there ...how do you know if your rack damper pin is Bad or just needs adusting...???
Did you ever talk to Matt?????
__________________
'87 924S '81 280SEL Sold -> 81 300SD - 93 300E w/ 3.2 85 300D- 79 300SD 82 300CD 83 300CD - CA 87 190E 5 spd 87 Porsche 924S "..I'll take a simple "C" to "G" and feel brand new about it..." |
#8
|
||||
|
||||
If the pin is good the engine should idle very smooth when its properly adjusted no matter what the temperature. If it is going bad you can get a variety of issues like the engine's idle becoming unstable when slowing down (mine began doing this a while ago) or when first driving the engine will hunt for its idle at stop lights going up and down and up and down (oil pressure gauge will bounce up and down too) The most noticeable and annoying symptom is that the engine shakes back and forth when the engine is idling when its nice and warmed up, a good pin should keep the engine steady no matter what. I tried fine tuning the pin for about 20 mins with the engine hot, and my pin does virtually nothing at all, plus my idle becomes unstable when stopping and the engine shudders and feels like its about to stall then it recovers...its getting very very annoying and is not pleasant.
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#9
|
||||
|
||||
That's exactly what my engine just started doing like 3-5 days ago....
I was thinkingit was something to do with running the veggie oil, but hte oil gauge was jumping a bit and the engine was jumping....and looking at my engine mounts they look fine.... I'll try adjusting it...and if not I'll order one too...
__________________
'87 924S '81 280SEL Sold -> 81 300SD - 93 300E w/ 3.2 85 300D- 79 300SD 82 300CD 83 300CD - CA 87 190E 5 spd 87 Porsche 924S "..I'll take a simple "C" to "G" and feel brand new about it..." |
#10
|
||||
|
||||
You guys are lucky to have that pin there, on my 116 300SD it didn't have the pin so I was told to just live with the shake though it wasn't that bad.
Thanks David
__________________
_____________________________________________ 2000 Honda Accord V6 137k miles 1972 300SEL 4.5 98k miles _____________________________________________ |
#11
|
||||
|
||||
Whats the difference?
Is there in moving parts inside the rack dampener bolt? I'm just trying to figure out how it goes bad, why the brass one is better and why it cost $50 bucks. Thanks alot guys.
|
#12
|
|||
|
|||
Yes, there is a spring-loaded pin at the end of the "bolt." The spring tends to loose its "spring" with age. And the gold version supposedly has a better spring.
|
#13
|
||||
|
||||
Update: My new pin DID make a difference, but, here's the catch, I just went back to dino-diesel again 100% yesterday because I wanted the power...(and the B20 station is 10.3 miles away, regular station is .3 miles away) No shake, at idle or in Drive, at all. It seems to only shake on B20, which is weird. It did used to shake on either dino diesel or B20, but the new pin calmed the shaking on B20, and seems to stop it altogether on diesel. It runs so quietly and smoothly on the Premium diesel I got yesterday, even moreso than on B20....perhaps the B20's cleaning properties cleaned it out good since I ran 2 tanks through, then went back to straight diesel (full fill up, over 18 gallons).......
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#14
|
||||
|
||||
I got a rack damper pin from Performance Products for $37.00
No offense to Phil and Fastlane, but the price difference was significant enough. I ALWAYS check Fastlane and if it is even close go with them, but sometimes $ is $
__________________
Jimmy L. '05 Acura TL 6MT 2001 ML430 My Spare Gone: '95 E300 188K "Batmobile" Texas Unfriendly Black '85 300TD 235K "The Wagon" Texas Friendly White '80 240D 154K "China" Scar engine installed '81 300TD 240K "Smash" '80 240D 230K "The Squash" '81 240D 293K"Scar" Rear ended harder than Elton John Last edited by whunter; 02-14-2011 at 03:25 AM. Reason: spelling |
#15
|
|||
|
|||
Here's what the Bosch "made in Germany" damper bolt looks like compared to the old bolt.
The new bolt is gold. It has much stronger spring action. Last edited by whunter; 02-14-2011 at 03:24 AM. Reason: spelling |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Euro Headlights on 1983 300D | TN-W124 Diesel | Diesel Discussion | 17 | 06-12-2002 12:48 AM |
Rack Pin Part# | JOJO126 | Diesel Discussion | 1 | 03-06-2002 03:26 PM |
crossmatch oem part #'s to fastlane part #'s | guy45515 | Tech Help | 1 | 01-14-2002 03:50 PM |
Why is part taking so long?91300TE4M | Hazen | Tech Help | 3 | 03-09-2001 08:50 PM |
new rack damper bolt 79 300 SD | wgrr | Tech Help | 1 | 09-23-2000 07:01 PM |