|
|
|
|
|
#1
02-15-2007, 03:32 PM
|
|||
|
|||
|
Coolant Drain Plug/block heater install
Hello,
I was wondering if the coolant drain plug in my 300sd that I undid to drain the coolant from the engine a month back is the same plug I would put a block heater in. The location seems right. I have yet to get under there and check more thoroughly, but its cold under my carport, and would like to spend as little time outside as possible... THanks, Ben 
|
|
#2
02-15-2007, 04:08 PM
|
||||
|
||||
|
No, it is not the same. IIRC the block heater plug is a larger diameter. It is above the starter on the OM617
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
