|
|
|
#1
|
|||
|
|||
vacuum testing
I have a question on testing the vacuum central locking system. If you pull both of the plastic lines out of a vacuum lock rubber connection. Then if you try to pull vacuum on the locking yellow plastic line & the unlocking plastic line should both of them hold vacuum? I get it to hold on the locking side and not on the unlocking side.
|
#2
|
|||
|
|||
Yes, they should both hold vacuum. It sounds like you have a leak someplace in the unlock circuit. Check each section at the tees until you narrow down the leak location.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|