PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   What about these euros? (http://www.peachparts.com/shopforum/diesel-discussion/181653-what-about-these-euros.html)

stcbenz83 03-07-2007 10:19 PM

What about these euros?
 
http://www.katmac.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=KI&Product_Code=W123HL&Category_Code=EHQ

i saw the original product on ebay at

http://cgi.ebay.com/ebaymotors/Mercedes-300D-W123-European-Headlights-Euro-Pair_W0QQcmdZViewItemQQcategoryZ33710QQihZ004QQitemZ140092924193QQrdZ1

they are pretty cheap in price. What are ur guys opinion?

henrydupont 03-07-2007 10:32 PM

they seem fine. get them! have they got them for the 126?

bgkast 03-07-2007 11:02 PM

I would stick with OEM. I paid about $70 for my set. Keep an eye out on fleabay.

stcbenz83 03-07-2007 11:04 PM

yea, i'd really like to use the headlight aiming function on my car. but i dont think these have the vaccum system on it

thorsen 03-08-2007 08:34 AM

Those were the same brand I put on my 126. The ones I bought came with the vacuum adjusters, and I bought the adjusting wheel off the classifieds here.

Want to save some money and time? Don't worry about the vacuum adjusters. You will play with them for a week and then never touch them again.

Magoo 03-08-2007 09:01 AM

Made in CHINA
 
They look just like the ones I bought, but not from Katmac. I paid 180, shipping included, but did not get the bulbs and other goodies with it. No vacuum adjusters either, just a couple of knobs on the back. The worst part was the plug pinout on the light did not match the car side. So I had to figure out which pin goes with which light and reconfigure the car side plug accordingly. They do work well though= bright. I'm satisfied with them, but if I had it to do over, I would look for a set of Bosch or Hella units.

Johnhef 03-08-2007 12:20 PM

I have the lucid ones in my coupe, no vacuum adjusters in them.

arcticathlon 03-08-2007 12:38 PM

can you post the wiring diagram, i had to redo it also when i got my lights. and i want to make sure that i did it right. i have had some battery discharging problems and want to make sure i did it right.


All times are GMT -4. The time now is 12:48 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website