|
|
|
|
|
#1
03-20-2007, 08:16 AM
|
|||
|
|||
|
remove dome light cover
Hello,
How do I remove the dome light cover? I do not see any screws or anywhere to put a flathead to pry it off. I do not want to break it. Just change the bulb. Thanks A 
|
|
#2
03-20-2007, 08:16 AM
|
|||
|
|||
|
BTW,
This is the front dome light. A
|
|
#3
03-20-2007, 08:18 AM
|
||||
|
||||
|
You should give a clue to what model you are asking about. If its your SDL that is listed in your profile - On the passenger side of your front dome light panel are two spring clips. Each is below the corner on the passenger side. Carefully with a small straight head screwdriver release the two spring clips and flip the panel towards the driver side. You will have some electrical connections and the air sampling hose to disconnect.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) Last edited by TX76513; 03-20-2007 at 08:33 AM.
|
|
#4
03-20-2007, 01:02 PM
|
|||
|
|||
|
Ah,
That would be helpful....wouldn't it. It is an 87 300SDL And thank you for the reply. Do I have to remove or disconnect any wires to change the bulb?
|
|
#5
03-20-2007, 01:34 PM
|
||||
|
||||
|
Quote:
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o)
|
 |
| Bookmarks |
|
|
Linear Mode
