How can you repair the plastic pin on the tail end of the zembrano wood in the console?

I tried gluing a make shift pin, but it broke in a few days.

Thanks!

__________________
RRGrassi


70's Southern Pacific #5608 Fairmont A-4 MOW car

13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete.

91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K

90 Dodge D250 5.9 Cummins/5 speed. 400K

Price out the 2 options below

1. Go to the dealer and buy a 240D plastic center console or

2. Go to a junk dealer and find a really bad wood trim console ( think cheap but with a good pin) or a 240D plastic unit.

If you get the wood trim. Cut out the pin with the plastic. Notice the edges are beveled and it will slide into the good piece that you have.

Or do what I did. Buy a 240D plastic trim piece and cut the pin and surounding area to fit the good trim piece. A little epoxy ( watch out for drips) and your good to go.

Dave

__________________
1970 220D, owned 1980-1990
1980 240D, owned 1990-1992
1982 300TD, owned 1992-1993
1986 300SDL, owned 1993-2004
1999 E300, owned 1999-2003
1982 300TD, 213,880mi, owned since Nov 18, 1991- Aug 4, 2010 SOLD
1988 560SL, 100,000mi, owned since 1995
1965 Mustang Fastback Mileage Unknown(My sons)
1983 240D, 176,000mi (My daughers) owned since 2004
2007 Honda Accord EX-L I4 auto, the new daily driver
1985 300D 264,000mi Son's new daily driver.(sold)
2008 Hyundai Tiberon. Daughters new car

I have seen one with a screw screwed through there to work like the pin did.

__________________
Jim