Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-29-2007, 09:31 AM
iamamanc
Guest
 
Posts: n/a
Injector question W124 OM606

Hi
I had the top off the engine yesterday 'cos a diesel return flow pipe had come off.
I noticed that when the engine was running there were bubbles blowing from deep down in the bottom of the reccess where the injectors screw into the head. I had just driven ca 100 miles so the engine was at temperature.
I am sure that I have read somewhere that at the bottom of the injector there is a small hole in the side of the seal. Is this normal that air or diesel should be blowing from around that area (where the injector in screwed into the head) causing bubbles to form?. My instincts say no, no, no.
This was happening on all the injectors apart from one. So one is good or five are good.
I hope that it's just the seals that have gone
Anyone any ideas

Cheers
Adrian

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page