|
|
|
#1
|
|||
|
|||
Flywheel bolts
In the process of trying to revive a 616 with a chewed up crank and i cant for the life of me find a socket to fit the flywheel bots what the heck are they ?
and also if anyone has a good used crank, oil pump, or 2 connecting rods for a OM616.011.28.01 please let me know |
#2
|
|||
|
|||
12mm 12 point.
|
#3
|
|||
|
|||
I remember this very well..
I stripped them once. Be very very careful and very very patient!!!!! DO NOT RUSH.
|
#4
|
||||
|
||||
Correct! I couldn't believe I had an old one lying around. Most everything is 6 point...
__________________
Jimmy L. '05 Acura TL 6MT 2001 ML430 My Spare Gone: '95 E300 188K "Batmobile" Texas Unfriendly Black '85 300TD 235K "The Wagon" Texas Friendly White '80 240D 154K "China" Scar engine installed '81 300TD 240K "Smash" '80 240D 230K "The Squash" '81 240D 293K"Scar" Rear ended harder than Elton John |
#5
|
|||
|
|||
Snap-on part # IMDFM12. It is a 3/8" drive impact socket. Good and beefy. Worth the money. I broke two "cheapie" chrome sockets taking apart an old 615.
I've used an impact driver on this socket and never had a problem. |
#6
|
||||
|
||||
They are used only once so I have had sucess with a pipe wrench and a breaker bar section of pipe....
__________________
Over 21 years I owned several: w108 w110 w111 w115 w116 w123 w124 w126 w212 |
Bookmarks |
|
|