Yes, I know that.
OK Dude.

Trolling !!!

? you're not only admitting to trolling but bragging about it ? .

Wow .

722. Tranny Pressure Adjustment
 

THANK YOU ! .

I've been looking for this thread, Bill kindly sent it to me .

The dealer is unable to locate the part or part number for ALDA banjo bolt.
 

I'm attempting to locate the part number for the ALDA banjo bolt so I can order one through the dealer. Does anyone know the part number?

If I give one to you, will you be polite and say thank you ? .

not sure if this is helpful - but the "PITTSBURGH AUTOMOTIVE
Engine Oil Pressure Test Kit" from HF has all the fittings/adpaters and hose/gauge you need to test the pressure from under the car. hose not long enough to bring into cabin of course. The whole kit is only 29 bucks - so maybe be not a bad alternative to using a banjo bolt for this.

Belmertic.com has fittings.

H.F. Test Kit
 

Here it is : https://www.harborfreight.com/engine-oil-pressure-test-kit-62621.html

I don't see any banjo bolts in it .

I think the HF kit has a M8x1 fitting which is the one you need. That kit is also mentioned in the “1981 – 1985 300SD 722.3 and 722.4 Transmission Adjustment Guide” by Peter Keun that I found online.

The PN for the bolt is N 000000 004895 or N 915036 005100 and the sealing washer is N 007603 008109.

yeah - it has the right fitting, and even a right angle adapter, so it works with the hose and gauge in the kit. no banjo bolt needed.

H.F. Kit # 62621
 

THANK YOU ! .

https://www.harborfreight.com/engine-oil-pressure-test-kit-62621.html