|
|
|
|
|
#1
06-05-2007, 01:57 AM
|
|||
|
|||
|
Easy upper control arm re & re
Just finished the upper control arm job. Took some pics as I went along and did a little write up. All in PDF
I hope this works, never posted like this before.
__________________
1984 300SD turbo 126 "My true love" God made me an atheist and who am I to question His wisdom Last edited by The Gears; 07-31-2011 at 03:37 PM. 
|
|
#2
06-05-2007, 06:39 AM
|
||||
|
||||
|
Good write up. I did this a while back in addition to tie rods. I didn't see the need to mess with the shock absorber though.
Still need to do my lower control arm bushings..how bout a nice pictoral for that? 
__________________
1985 CA 300D Turbo , 213K mi
|
|
#3
06-05-2007, 09:45 AM
|
|||
|
|||
|
try this thread
I go into some detail on the lower on this write up: - enjoy:
Write up - Ball Joints & Lower Control Arm Bushings & Tool Review (PICS!)
__________________
~shell As of 2/2010: 2001 CLK55 0o\=*=/o0 13.6 @ 106mph 10K mi 1984 300SD 260K mi and going and going... 97 S600 46K miles 1991 Sentra SE-R (extremely dorked with) www.se-r.net
|
 |
| Bookmarks |
|
|
Linear Mode
