1995 300D injector tool
Good Morning, Anybody know what tool is needed to R & R the fuel injectors
on this 1995 300D? Anything particularly difficult about this process. I've got one cylinder not firing, the injector is not putting fuel thru. Thanks Al |
There are two special splined sockets you can find on the Special Tools tab above used to remove the injectors and the delivery valves.
If the problem is the injector you can have it tested, cleaned and balanced; a new nozzle installed; or replaced with a new one. If the problem is at the IP delivery valve you should have the IP bench tested. The valve itself should only be fiddled with professionally. If its missing at start it could be the GP is out..... |
Thanks, now I'm going in the right direction
Al |
All times are GMT -4. The time now is 07:25 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website