|
|
|
#1
|
|||
|
|||
Part that connects to the valve cover breather hose...
What is the hose that wedges into the valve cover breather hose and continues to the air filter housing called??? I snapped mine like a brittle twig after trying to reattach it. Let me back up:
After a LONG day of driving, I turned the key off and pulled it out, and the car kept running. No sweat, I figured the vac line just came undone. Popped the hood, the car shut off (by itself), and noticed that the hose in question and the valve cover breather hose had flown off and were over by the inline fuel filter!!! WTF??? Also, the nut that holds the air filter cover was nowhere to be found. So I reattached the valve cover breather hose (with its continuing hose) back to the valve cover and air filter housing but when I went to put on a new nut, and sort of pushed the hose out of the way, it snapped like a twig. I duck taped it for now. But upon looking for a replacement part, all I could find was the valve cover breather hose. So what's the other part called? It's also a hose but more hard plastic, and attaches to the air filter housing. Thanks!
__________________
JBG 1985 TD wagon, 228k running on grease since 3.07 AUSTIN, TEXAS |
#2
|
|||
|
|||
#3
|
||||
|
||||
Try merdecessource.com they have a flat hose, attempt breather hose.
__________________
83 SD 84 CD |
#4
|
|||
|
|||
Quote:
http://catalog.worldpac.com/mercedesshop/sophio/quote.jsp?header=header.jsp&footer=&product=B2010-36001&partner=mercedesshop&baseurl=http://catalog.peachparts.com/&clientid=catalog.mercedesshop&cookieid=23H0N2A6324C0HF3PM |
#5
|
||||
|
||||
I have heard that the flat hose will cut down on oil consumption. I may give it a try thanks for the link.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#6
|
|||
|
|||
Thanks for the links, I ordered one here at mercedesshop.com!
Is it safe to drive the car with a patchy duck tape fix on this part until the new one arrives? I did my best with the taping but it was 11 PM and I'd been on the road for a while.... Thanks again hombres. BG
__________________
JBG 1985 TD wagon, 228k running on grease since 3.07 AUSTIN, TEXAS |
#7
|
||||
|
||||
surly safe. perhaps a bit messy, but safe for sure.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#8
|
|||
|
|||
I drove mine for a week or so with a decent sized tear in the hose, I don't think it will hurt anything for a short time.
|
#9
|
||||
|
||||
Yeah, you should be ok.
__________________
83 SD 84 CD |
#10
|
|||
|
|||
which side goes where?
Tangofox, I ordered that part after following your link, got it today. Quick question: does it matter which end goes on the valve cover? The shallower end fits ok but the deeper end allows the hose more clearance above the air filter housing. Should I clamp the deeper end on the valve cover and just wedge the shallow end over the nozzle on the air filter housing?
__________________
JBG 1985 TD wagon, 228k running on grease since 3.07 AUSTIN, TEXAS |
#11
|
||||
|
||||
the end on the longer side goes on the valve cover. can't remember if its the shallow or deep end, but i would guess the deep end. but i haven't had the stock intake for 3 years now!! but i had the exact same problem before i started to mess with the car.
__________________
1983 Toyota Tercel 4WD Wagon - 1984 Mercedes-Benz 300SD 4-Speed(My Car!) 2005 C230 Kompressor 6-Speed Manual
|
#12
|
|||
|
|||
SirNik84, it looks like that way makes the most sense--thanks for the confirmation.
__________________
JBG 1985 TD wagon, 228k running on grease since 3.07 AUSTIN, TEXAS |
#13
|
|||
|
|||
Yes. And a hose clamp on the valve cover end is not a bad idea.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|