Does anyone know where to buy banjo bolts?

I need to replace the one that connects the ALDA to the exhaust/turbo.

I can't seem to find anyplace that sells them online except Pegasus racing.

Thanks,
JH

__________________
* 1984 300D-Turbo - Daily Driver
* In search of a good 81-84 300TD-Turbo Wagon

ALDA to the exhaust? Maybe intake manifold?

Try a wrecking yard.

Sixto
87 300D

See if one of the banjo bolts at the fuel filter will work. That will open up a range of options at the wrecking yard.

Sixto
87 300D

I know I have some, are all banjo bolts on a 617 the same size. I suspect the ones on the fuel side are bigger. So, I would have to pull one of mine out to make sure. Sounds like about $5.00 plus shipping.

__________________
Junqueyardjim
Christianity, if false, is of no importance, and if true, of infinite importance. The only thing it cannot be is moderately important. C.S. Lewis



1983 Mercedes W123 240D 4 Speed 285,000 on the road with a 617 turbo, beautiful butter yellow, license plate # 83 240D INDIANA

2003 Jaguar Type X, AWD. beautiful, good mileage,
Mom's car, but I won't let her drive it!

sixto - yes, thanks for correcting me, it is the one on the intake manifold...

junqueyardjim - I'll check one of the ones at my fuel filter, as sixto suggested, and I will let you know if it is the same.

Thanks guys,
JH

__________________
* 1984 300D-Turbo - Daily Driver
* In search of a good 81-84 300TD-Turbo Wagon

i just did played with most of the bolts on my car (engine replacement). the fuel ones are bigger than the ones the OP is talking about. the one he needs are a 12 mm head i believe and they are the ones on the ALDA and the manifold only that i have found.

__________________
-Trevor

OBK #12
1980 300SD 333,XXX miles - Totaled
1986 Mazda RX-7 212,XXX miles - impounded and auctioned off
2005 Jeep Liberty CRD Limited 33,000- SEGR, Provent, Fumoto