PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (
-   Diesel Discussion (
-   -   Replacing drivers side passanger window. (

Cervan 09-07-2007 06:10 PM

Replacing drivers side passanger window.
Im replacing the drivers side, window (the one behind the drivers door) because some crooks decided it would be cool to bust it out. Any tips? this car is a 1981 240d. i dont have the cd or manual, can somone link me the section on this?

vstech 09-07-2007 07:44 PM

start with dieselgiant's pictorial on door panel removal.
have a good shop vac to get all the little bits of glass up.

Stevo 09-07-2007 10:50 PM

After you let the two bolts go at the bottom and pry off the outside trim you must tip the glass 90 degrees too lift it out, reassemble in reverse order. Sorry about your scum bag, crook experience.

MTUpower 09-07-2007 11:28 PM

Let's help you here: first off, there is a driver's side and a passenger side of the car. There is no driver's side passenger window. From there, remove the door panel. start off with the lock knob- it unscrews. Then remove the black plastic cosmetic piece from the lock area with a knife on the edges. Underneath you'll find a screw to hold the chrome. You also have the door handle- use a plus screwdriver. Dont forget the edge latch chrome trim- two plus screws. Then pry the edges of the door panel off- they have plastic keepers around the edge. You now can see the real workings of the door. Lower the window and look at the remaining parts of the window. Remove the window and reverse the process to install the new window.

All times are GMT -4. The time now is 11:18 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website