|
|
|
#1
|
|||
|
|||
Power steering front seal
Hi everyone,
My PS front seal on the 81SD is leaking. I did a search and found a very good write-up on changing the seal on a 92 or 95 E. But the pump looked very different than the SD, and they also talked about two front seals as opposed to one (according to my parts booklet) on the 617 engine. My question is: can the seal be accessed after the pully is removed or does the pump have to be removed from the car and disassembled to get at the seal? I have the new seal ($4.50 at the dealer!!!) Thanks
__________________
1994 E320 94k 1991 300TE 105K 1985 SD 184k 1983 SD 167K 1970 280SE 54K, sold 1981 SD 271k, sold 1984 300D 145K, sold |
#2
|
|||
|
|||
Did you figure this out?
The front seal on my 300CD PS pump is leaking. So I need to do the same job. Cheers
__________________
Neil. 1991 190E 2.6 170k 1995 E320CA 57k 1999 Chevy Tahoe 98k 2000 R1150GS 45k 1983 300CD 178k - sold, but not forgotten |
Bookmarks |
|
|